ECO PRO2 INSTRUCTION 6. Starting the EcoPro
1. Connect the Power Cable to the AC Adaptor securely.
2. Connect the cable of the AC Adaptor to the AC Inlet at the backside of the Main Unit.
3. Plug the power plug into a grounded outlet or power bar.
4. Turn ON the Main Power Switch.
The LCD displays “Starting”, the Hatch opens automatically, and then the LCD displays “CD/DVD” and the Remaining time of the KEY CARD.
If the LCD displays “No KEY CARD” message, turn OFF the Main Power Switch, insert the KEY CARD to The KEY CARD Slot properly, and then turn ON the Main Power Switch again
Contents.
2. Connect the cable of the AC Adaptor to the AC Inlet at the backside of the Main Unit.
3. Plug the power plug into a grounded outlet or power bar.
4. Turn ON the Main Power Switch.
The LCD displays “Starting”, the Hatch opens automatically, and then the LCD displays “CD/DVD” and the Remaining time of the KEY CARD.
If the LCD displays “No KEY CARD” message, turn OFF the Main Power Switch, insert the KEY CARD to The KEY CARD Slot properly, and then turn ON the Main Power Switch again
Contents.
- 1. Setup Instructions
- 2. Contents of Package
- 3. Description of Parts
- 4. Setting up the EcoPro
- 5. Using the KEY CARD
- 5.1 Attaching the Bottle Holder
- 5.2 Preparing the Waterand Polish Bottles
- 6. Starting the EcoPro
- 7. Operating the Pumps
- 7.1 Water Pump
- 7.2 Compound Pump
- 8. Installing the Pads
- 9. Repairing Discs
- 9.1 Choosing Disc Repair Mode
- 9.2 Stopping the Repair
- 10. Increasing the Repair Time
- 11. Cleaning the Pads
- 12. Add Water message
- 13. Change Key Card message
- 14. Daily Cleaning
- 15. Daily Checklist(can be removed and placed by machine)
- 17. LCD Display Summary Table
- 18. Error Messages
- 19. Alert Messages
- 20. Consumables
- 21. Maintenance Parts
- 22. Trouble shooting