ECO PRO2 INSTRUCTION 15. Daily Checklist
Before a Disc Repair Session:
1.Remove the black compound nozzle caps and set them a side.
2.Prime compound and water pumps; make sure compound and water are coming out of the nozzles.
Compound pump—hold Stop and press Function Button. Water pump—hold Start then press Function Button.
3.Installaclean, dry set of pads.
After a Disc Repair Session:
1.Put the caps back on the compound nozzles.
2.Clean the machine.
Spray inside with gentle cleaner like Windex and wipe out with soft cloth. Lift out disc Platen and clean polish tray.
3.Rinsethepads, wring them out and let them dry overnight.
Contents.
1.Remove the black compound nozzle caps and set them a side.
2.Prime compound and water pumps; make sure compound and water are coming out of the nozzles.
Compound pump—hold Stop and press Function Button. Water pump—hold Start then press Function Button.
3.Installaclean, dry set of pads.
After a Disc Repair Session:
1.Put the caps back on the compound nozzles.
2.Clean the machine.
Spray inside with gentle cleaner like Windex and wipe out with soft cloth. Lift out disc Platen and clean polish tray.
3.Rinsethepads, wring them out and let them dry overnight.
Contents.
- 1. Setup Instructions
- 2. Contents of Package
- 3. Description of Parts
- 4. Setting up the EcoPro
- 5. Using the KEY CARD
- 5.1 Attaching the Bottle Holder
- 5.2 Preparing the Waterand Polish Bottles
- 6. Starting the EcoPro
- 7. Operating the Pumps
- 7.1 Water Pump
- 7.2 Compound Pump
- 8. Installing the Pads
- 9. Repairing Discs
- 9.1 Choosing Disc Repair Mode
- 9.2 Stopping the Repair
- 10. Increasing the Repair Time
- 11. Cleaning the Pads
- 12. Add Water message
- 13. Change Key Card message
- 14. Daily Cleaning
- 15. Daily Checklist(can be removed and placed by machine)
- 17. LCD Display Summary Table
- 18. Error Messages
- 19. Alert Messages
- 20. Consumables
- 21. Maintenance Parts
- 22. Trouble shooting